|
|
Tire Changer Accessories For Hunter Automatic and Conventional Tire Changers
|
Quick Disconnect Center Shaft (RP6-11522)
Replaceable Center Shaft with quick disconnect coupler allows additional clamping accessories to be utilized including cam plate and cones. Interchange coupler bolt is not included. |
|
Shaft Cover, Wheel Hub Protector Sleeve (RP6-8703)
The Protector Sleeve protects the wheel hub from potential shaft contact. Installs over the top of the center shaft (RP6-11522) when installing or removing a wheel from the Center Shaft Kit.
|
|
Two-Sided Cone for LT Wheels (RP6-1157)
Ideal for use with the regular-sized clamping cone when the wheel hub bore is larger than the standard cone and the cam plate clamping method is selected. |
|
Cone Cover, Wheel Hub Protector (RP6-1156)
Protects the wheel hub bore from contact when clamping with the short cone (RP6-1460) is a concern.
|
|
Short Cone (1 ea.) (RP6-1460)
The Short Cone Kit helps provide added stability when utilizing the QD center shaft without the cam plate. Clamping cones are not to be used without the added support of the rubber pad internal clamping method
(2 required). |
|
Cam Plate Assembly (RP6-13599)
The cam plate assembly allows clamping of most wheels without the need to use the internal rubber pads or external extension arms or jaws. A must if lifting and servicing reversed drop center wheels larger than 20” with the wheel lift. The unique design automatically tightens the wheel as it rotates under load regardless of direction or rotation. No lug pin is required. Shown with Rubber Pads (RP6-13719) installed. |
|
Cam Plate Spacer (1 ea) (RP6-13613)
The cam plate spacers help raise the cam plate on the clamping system when “non-reversed” traditional drop center wheels are used with the cam plate assembly (4 required).
|
|
Rim Securing Device (RP6-1485) TC35XX, TC3250
Assists in internal clamping of conical or greasy wheels without using steel clamping jaws. Prevents damage to rim surface coating. |
|
Flange Plate, Center Support Ring
For wheels with
extra-large center holes. Great for 1-ton trucks. Attaches to center support.
For TC35XX/TC3250 “QD” Systems
(RP6-13911)
- 210 mm diameter
For TC3250/3500 (RP6-4140) - 200 mm diameter
|
|
Storage Bracket (RP6-13173)
Bracket allows storage of the center-shaft or center support when not in use. Easily attaches to the storage tray by drilling two small holes. |
|
Wheel Extension Plate
Spacer increases internal and external clamping capability to allow for handling of larger diameter wheels.
Extension for TC35XX machines
(RP6-10646) - 26” for TC3500 and 28” for TC3510
26” Extension for TC3250
(RP6-10655)
|
|
24” Wheel Extension Kit for TC3500 (20-1644-1)
Increases internal and external clamping capability to allow for handling of larger diameter wheels. Extension plate for use on TC3500.
* Not recommended for TC3510 machines |
|
Extension Arm Kit for TC35XX/TC3250 (4 ea.) (RP6-G1000A17)
Extension arms available without column extension plate. |
|
External Rubber Clamping Jaw for TC35XX /TC3250
(1 ea.) (RP6-8659)
For external clamping of reverse drop center rims. Not compatible with first generation RP6-4177. |
|
Clamping Jaw – Steel (1 ea.)
(RP6-2252)
Replacement steel jaw for clamping arm. For securing wheels when marring inside of rim is of no concern. |
|
Blast Inflator Retrofit Kit
(RP6-710290860)
Kit to retrofit existing TC3250 or TC3500 with new Blast Inflation System. |
|
Flange Plates for TC3700
(RP6-G1000A87)
Useful for plastic-faced wheels and/or reverse wheels where maximum finish protection is needed. |
|
40 Rimsled & Two-Mount Head Kit (RP6-G1000A91K)
Provides additional protection for painted or plastic-clad rims. Rimsled only fits “black” mount heads supplied in kit. |
|
Mounting Belt Kit (RP6-G1000A8)
Aids in mounting and matching difficult ultra-low-profile and runflat tires. Stiff low-profile tires and runflats are most difficult mounting the upper bead. When used in conjunction with a bead depressor tail with traction beam, the belt grabs the tire and pulls it into the drop-center, greatly easing mounting. Also a perfect tool for match-mounting with “two-finger” ease. |
|
Force Multiplier (RP6-G1000A23)
Bolted to the articulated arm of the tire changer, this accessory aids the operator with added leverage when seating the mount/demount head and holding it down against the wheel.
|
|
Plastic Shovel Protectors (1 ea.)
(RP6-G800A11)
Clip-on side shovel protectors prevent metal-to-metal contact when bead loosening low-profile tires on expensive alloy wheels, preventing damage to the wheel. |
|
Mechanical Bead Roller (RP6-G1000A7)
A high-performance option used to mount stiff low-profile tires. Pushes the upper bead of the tire below the right hand area of the mount head keeping the tire in the proper location during mounting. Eliminates extra work to mount stiff tires.
|
|
Polymer Mount/Demount Head (1 ea.)
(221-675-2)
Removes the potential of steel-contact damage. Rides closer than steel designs, reducing stress to beads when demounting and mounting low-profile tires. Wearing component designed to protect the tire and rim.
Polymer Mount/Demount Heads (6 ea.)
(221-675-2-B)
Receive the benefits of quantity discount pricing. |
|
Polymer Head Tire Changer Maintenance Kit (20-1506-1)
Provides convenient way to store maintenance items at the tire changer.
Kit includes:
A. Nylon Mesh Storage Bag (166-51-2)
B. Polymer Mount/Demount Heads (6 ea.)
(221-675-2)
C. Bead Lever Protector Sleeves (6 ea.)
(RP6-0326) |
|
Heavy-Duty Paste Bucket Mounting Bracket (RP6-0223)
Fits 3.5kg and 5kg size buckets. Easily installed on any convenient surface by installing two 5⁄16” bolts at 2” apart. |
|
Mount/Demount Head, Motorcycle & Extra Small Wheel (RP6-G1000A15)
Replacement polymer mount/demount head. Included in motorcycle kits #RP6-2053 and #RP6-3794.
|
|
Drive Pin Protectors for TC3700 & TCA34
(RP6-710090480)
Plastic cap protects lug holes of reverse wheels when clamped face down. |
|
Rubber Protection Plate for TC3700 & TCA34 Tire Changers (RP6-710013421)
Protections plate is soft for protecting reverse rims. Intended to be removed when not in use to protect reverse wheels.
|
|
|
|
|
|
