Tire Changer Accessories

A. High-Performance Bead Lever “HM”
(RP6-G1000A11)
Patented, high-performance bead lever dramatically reduces servicing effort and eliminates potential damage to expensive tires associated with traditional straight levers. A must for servicing low-profile tires.

B. Bead Lever Protector Sleeve (RP6-0326)
Patented sleeve protects wheel flange by allowing the bead lever to slip out of the tire instead of being dragged against the rim during demounting. This allows lever to work more efficiently, especially when servicing low-profile tires. Box of 10 (RP6-0326-B).

A. Traditional Flat Design Bead Lever
(RP6-G1000A52)
For demounting tires on rim-clamp type tire changers.

B. Bead Lever Sleeve Protectors (4 ea.)
(RP11-8-11400098)
Sleeve protects wheel flange by allowing the bead lever to slip out of the tire instead of being dragged against the rim during demounting. For use with RP6-0322 Bead Lever Tool.

Bottle Oil – Lubri-Oil Air Equipment Lubrication (148-133-2)
Lubri-Oil will not emulsify in water. When the lubricator becomes contaminated with water overflow from the regulator, the oil will separate. Available in 16-oz. bottles. Twelve (12) to a case when ordered in quantity. Lubri-Oil weight is ISO32.

Tsunami™ Automatic Water Separator
(20-1612-2)
Removes moisture and particulate from compressed air down to 10 microns. Integrated drain automatically ejects trapped water at the base of the unit. No filters requiring periodic change. Virtually no maintenance required. Capable of supplying clean, dry air to multiple pieces of equipment and tools. 100 cfm @ 175 psi.

Additional Accessories
A. Valve Stem Puller (RP11-2020688)
B. Valve Core Remover (RP11-2020689)
C. Rim Edge Protector (RP11-2202106)

Aluminum Clamp (RP11-8-11400070)
Drop-Center Clamp can be used as a traction point or bead guide. Guides bead into drop center.

Drop-Center Mounting Clamp (RP6-70210E)
Use mounting clamp to help position the bead into the drop-center. Not for extreme positive offset, flat-faced rims or soft-line flanges. Alternative tools: RP6-1572, RP6-7290.

A. Mounting Paste (3.5 kg) (RP6-3784)
Eases mounting of stiff low-profile tires. Aids in faster bead sealing during inflation. Prevents vibration complaints as a result of tire moving on wheel after balancing. Neutral in pH and eliminates rim corrosion. Helps keep equipment cleaner. High-performance mounting paste is premixed to prevent incorrect mixing of water to liquid concentrates.

Also available:

• Mounting Paste, 8 (3.5 kg) Buckets (RP6-3784-B)
• Mounting Paste, 64 (3.5 kg) Buckets = 1 pallet (RP6-3784-BP)

B. Brush, Angled Applicator (RP6-1506)
Allows for proper application of mounting paste. Angled to allow easy access to the “toe area” of the bead most commonly damaged during mounting.

Optional Bead Depressor Tail Helps Position Low-Profile Tires Into “Drop-Center” for Mounting and Demounting

Keeping the upper bead of the tire lubricated and pushed to the edge of the rim’s drop-center is crucial. This tool should be an essential part of the mounting process.

28” Bead Depressor Tail With Traction Beam for TC3500/TC3250 (RP6-G1000A67)
Bead Depressor Tail with traction beam aids in locking tire to rim and pushing low-profile tires down into drop-center for mounting. Services up to 28” diameter rim.

Bead Depressor Tail for TC3100/TC3000/TCX500
(RP6-7290)
A necessity when handling difficult tire and rim combinations. Makes an excellent addition to any conventional table top tire changer. Services up to 20” diameter rim.

EH2 Bead Depressor Block (RP6-12749)
EH2 bead depressor block with dual-depth pushing wedge can also update bead depressor tails with single sided wedge designs. The deeper EH2 block pushes the tire deeper into the wheel to more easily service BMW runflat tires, EH2, Motorsport and deep
drop-center, alloy wheels.