| Exclusive Features Easily and Safely Handle Today’s Toughest Tire and Wheel Combinations The Hunter TC3700’s exclusive features operate in unison to easily and safely change the world’s toughest performance tires and wheels. |
||
|
Floating 3-Point Articulated Mounting Arm
  Faster and easier to use than any other design. No need to adjust the arm away from the wheel. The polymer mount/demount head follows rims without damage even when the wheel is clamped off-center.† Force Multiplier helps with mounting and demounting low-profile tires. Mechanical bead roller is a must for handling stiff, low-profile tires. |
Center Clamp Design
 Offers maximum flexibility for a wide range of diameters. Same clamping used on a 10-inch wheel as used on a 28-inch wheel. Same clamping on reverse and standard wheels. Cam plate clamping multiplies the clamping force when wheel is turned. |
|
|
Adjustable Clamping Table
 Three height positions for comfortable work height on all offsets and reverse wheels. For reverse (face down) rims, a consumable protection cover is provided. No need for complicated, time-consuming flange plates. Drive pin extension with protectors allows engagement of clamping system on virtually any wheel. |
Moveable Column
 Simple hand wheel allow column adjustment from 10 to 28 inches of rim diameter range. |
|
|
Driven by High-Torque
Electric Motor  Variable speed operation allows 15 and 7 rpm clockwise rotation, 15 rpm counterclockwise. Ample power with 885 ft-lbs. of torque. |
Simple Two-Finger Controller
 Air-over-hydraulic two-stage system allows fast positioning and operation of both upper and lower bead rollers. |
|
|
Exclusive Hydraulic Bead Roller System Aids Mounting, Demounting and Ultra-High-Performance
Bead Loosening  Safely and easily handles ultra-low-profile tires, rim protection sidewalls, EMT Goodyear, Michelin and Bridgestone run-flat designs. Easily rolls the tire off or on the rim while reducing the potential for damage. Allows bead looseninig operations to be performed from an upright standing position. |
Tilted Ergonomic Design
for Ease of Operation  Allows unobstructed access to the lower bead for lubricating before tire removal. Complete operation, including bead loosening, can be performed from one position, saving time and physical energy. |
|
|
Side Shovel Bead Loosener
 Side shovel bead loosener allows servicing niche applications such as motorcycle and ATV tire and wheel assemblies. Ease of use and common familiarity assists inexperienced operators until they can get up to speed using the bead roller assembly on high-performance applications. |
Simple Mounting Aids Guide Bead Into Drop-Center  28-inch Bead Depressor “Tail” aids in positioning low-profile tires down into drop-center for mounting and demounting. Mechanical bead roller on mount head. Traction bar and bead depressor tail. |
|
The TC3700 Makes Match-Mounting Easy! The Hunter TC3700 and GSP9700 make a great combination to eliminate vibration problems, reduce comebacks and increase customer satisfaction. |
||
|
When used in conjunction with Hunter’s GSP9700 Road Force Measurement® System, the TC3700 quickly and easily helps to eliminate vibration problems that balancers alone can’t fix. The GSP9700 uniquely identifies tire force variation and rim runout related vibration that can often be eliminated by repositioning the tire on the rim. The TC3700 makes match-mounting easy with hydraulic bead rollers that allow the operator to spin the tire on the wheel regardless of aspect ratio or tire stiffness. |
 |
|
 |
 |
|
| Use the TC3700 to easily and safely rotate the tire on the wheel to eliminate vibration. | Exclusive, hydraulic bead rollers match the tire to the wheel even on difficult low-profile tires and run-flats. | |
|
For pricing and ordering
information on Tire Changers or other
Hunter products, contact your local Hunter representative. See the
representative locator
or contact Hunter Engineering
Company. To receive a quote on this equipment, go to Get-A-Quote. |
