TC3500 Tire Changer

The Hunter TC3500 and GSP9700 make a great combination to eliminate vibration problems, reduce comebacks and increase customer satisfaction.		The TC3500 Makes Match-Mounting Easy! When used in conjunction with Hunter’s GSP9700 Road Force Measurement® System, the TC3500 quickly and easily helps to eliminate vibration problems that balancers alone can’t fix. The GSP9700 uniquely identifies tire force variation-and rim runout-related vibration that can often be eliminated by repositioning the tire on the rim. The TC3500 makes match-mounting easy with two-finger control that allows the operator to spin the tire on the wheel regardless of aspect ratio or tire stiffness.

Use the TC3500 to easily and safely rotate the tire on the wheel to eliminate vibration.		Exclusive, two-finger control matches tire to wheel even on difficult low-profile tires and run-flats.

Floating 3-Point Articulated Mounting Arm No swing arm obstruction when servicing extremely wide wheels and tires. No need to adjust the arm away from the wheel. The head follows rims without damage even when the wheel is clamped off-center. Polymer mount/demount head* removes the potential of steel-head-contact damage. Mechanical bead pusher is great for handling stiff, low-profile tires.		Spring-Loaded Wheel Centering Support Work surface remains at consistent height regardless of rim width. "Lifts" tire to the operator upon release. Helps prevent back injury. Quick Disconnect Center Support is easily removable, allowing the easy addition of optional tools.

Exclusive "Tulip" Wheel Clamping System Eliminates steel-jaw clamping, which can damage the surface of exotic wheels. Clamping arms, brake and motor are sealed against dirt, debris and moisture. Eliminates traditional table designs that may act as a "launch pad" in case of tire failure.		Blast Inflation Nozzle Handheld nozzle makes inflation fast and easy by allowing the technician to direct bursts of compressed air to seat the bead.

Simple Two-Finger Controller Air-over-hydraulic two-stage system allows fast positioning and operation of both upper and lower bead rollers.		Exclusive Hydraulic Bead Roller System Aids Mounting, Demounting and Ultra- High-Performance Bead Loosening Safely and easily handles ultra-low-profile tires, rim protection sidewalls, EMT Goodyear, Michelin and Bridgestone run-flat designs. Easily rolls the tire off or on the rim while reducing the potential for damage.

Tilted Ergonomic Design for Ease of Operation Allows unobstructed lower bead access for lubricating before tire removal. Complete operation, including bead loosening, can be performed from one position. Bending over is not required for bead loosening.		Side Shovel Bead Loosener 28” Bead Depressor “Tail” aids in positioning low-profile tires down into the drop-center for mounting and demounting Side shovel bead loosener allows servicing niche applications such as motorcycle and ATV tire/wheel assemblies. Common shovel assists inexperienced operators who are not familiar with the bead roller assembly.

Ordering Information For pricing and ordering information on Tire Changers or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

WHAT'S NEXT?

Locate Sales Rep

Locate Service Rep

© Hunter Engineering Company