| |
Hunter Computerized Inspection Lane
 |
Find more work, obtain more customer authorizations, increase service revenue! |
|
Much faster and more thorough than visual inspection. |
|
No need to lift the vehicle or remove wheels. |
|
Accurately measures vehicle as it performs on the road. |
|
Easy-to-understand printouts help sell service. |
|
Customizable configurations designed to meet your specific shop needs. |
|
Surface-mounted system makes installation simple, relocation easy. |
|
Low-profile design keeps write-up area clear. |
|
|
Present Complete Brake and Alignment
Test Results in Less Than One Minute!† |
|
|
B400 Brake Tester
|
Displays test results in 30 seconds or less. |
|
Brakes are tested as they perform on the road. |
|
Tests brake balance, brake force, and deceleration. |
| |
WinSI Console and Software
|
Guides operator through test sequence. |
|
Graphically displays results. |
|
Provides printouts for customer review and stores results for later recall. |
|
Performs test after test automatically without operator even touching keyboard. |
|
|
SS100 Sideslip Meter
|
Quick, accurate test results within 30 seconds. |
|
Checks for excessive sideslip caused by misalignment or worn parts. |
|
Easy to perform – simply coast across tester at a walking pace. |
|
|
Measure How Brakes Perform on the Road
The patented Hunter brake balance display shows brake test results in a way that clearly communicates needed repairs to the vehicle owner. |
| |
B400 Brake Tester Measures:
|
Side-to-side brake balance on front and rear axles |
|
Front-to-rear brake balance* |
|
Actual brake force |
|
Deceleration |
|
Vehicle weight |
Plates use exclusive roller-bridge technology, moving only thousandths of an inch in order to operate. Very durable design uses minimal floor-level components. |
|
Increase Brake Service Revenue
| Hunter surveys show that 12% of vehicles tested will show brake failure at one or more wheels. A typical four-wheel brake service job represents $180.00 in repair revenue. |
|
|
|
| This vehicle has a slight bias toward the front brakes. However, all arrows are green, indicating that balance is within acceptable limits. This vehicle will have good stopping distance. |
|
|
| This vehicle fails with front-to-rear imbalance. The rear brakes are too strong. This vehicle will have poor stopping distance and may spin in an emergency stop. |
|
|
| In a panic stop, which wheel will lock up first? In this example, it is the right front. This vehicle will have poor stopping distance and directional control. |
|
|
Find Problems That Lead to Rapid Tire Wear
The Hunter Sideslip Meter quickly checks for vehicle sideslip caused by misalignment or worn parts. High sideslip leads to rapid tire wear.
Simple to Operate
Simply coast over the tester at the rate of a slow walk. The amount of sideslip for each axle is measured independently with the results shown immediately on the console.
B414-07-GLV Inspection Lane configuration with a WI132 console. (WinSI Inspection consoles must be purchased separately.) | 
|
|
Increase Alignment Service Revenue
|
Hunter surveys show that 30% or more of vehicles will typically exhibit either alignment problems or worn parts. Alignment alone typically represents a minimum of $80.00 in service revenue and is one of the most profitable services in your shop. |
|
|
Sideslip Meter
| The Sideslip Meter is available in a flush-mount (SS104P) configuration (shown here) or above-ground (SS104) configuration. |
|
|
| In a panic stop, which wheel will lock up first? In this example, it is the right front. This vehicle will have poor stopping distance and directional control. |
|
|
Inspection Printouts Help Sell Needed Repair Work |
| |
Inspection Result Printouts
|
Test results feature easy-to-understand graphics to help service writers sell needed service to customers. All printouts may be customized to include items such as customer information and your shop's logo. |
|
|
Point & Click Inspections
Patented Point & Click Inspection feature utilizes 4,000 vehicle-specific inspection photos (requires Digital Photo option) to illustrate parts needing repair.
Point & Click printouts provide a printed description and a digital photo of parts needing replacement to help sell this service. |
|
|
Tire Inspections
| Tire inspection printouts show tire wear problems, air pressure measurements and other wear characteristics in simple graphic detail to help sell tire service. |
|
|
Uniform Standards and Guidelines
|
Motorist Assurance Program (MAP) Guidelines are included in WinSI software. |
|
|
|
|
|
