AlignLights Lift Accessory Puts Light Where Needed |
|
 Hunter’s AlignLights accessory puts light under the vehicle creating a safer and more efficient work environment. |
Hunter’s AlignLights lift lighting accessory provides a safe and efficient light source underneath the vehicle. The accessory is available on Hunter RX series alignment racks as an installed option or can be retrofitted to most previously installed RX racks. AlignLights are powered by the main lift rack power source and require no additional or exposed electrical cords. For efficiency, the lights automatically switch on when the rack is raised and off when the rack is lowered. |
 PowerSlide™ slip plates are now available on newly purchased, select Hunter RX Scissor Alignment Racks. Powerslide controls and status displays are conveniently located on the lift console. One touch of a button locks or unlocks them. |
|
|
Hunter’s PowerSlide™ slip plate locking mechanism electronically locks and unlocks rear wheel slip plate pins from the lift control console. This feature can significantly reduce extra trips around the vehicle to manually remove and replace lock pins during alignment procedures. PowerSlide slip plates also |
automatically lock when the rack is lowered to the ground preventing costly damage that might result when a vehicle exits the rack when the slip plates are unsecured. One touch of the PowerSlide button on the lift console locks or unlocks the slip plates. LED lights on the console indicate the slip plates’ status.
|
|
The Hunter L434GS integrates many of the best four-post alignment rack features into a general service lift rack that offers a robust and efficient platform for performing non-alignment service. It features a 12,000-lb. lifting capacity and quick 45-second raise and lower times. A 180-inch wheelbase capacity and wide 22 1/2-inch runways accommodate small cars as well as wide trucks and SUVs. Options include 6,000-lb. capacity swing air jacks (ideal for brake work or tire rotation) or a 30-gallon rolling drain pan for fast and efficient oil, filter and fluid service. |
 The L434GS lifts to a height of 70 inches with 17 locking positions. Approach ramp extensions are available for low-clearance vehicles. |
|
Hunter Highlights Vol. 118S |
|
| Home | Site Map | Privacy Policy |