|
|
|
|
|
175-325-1 Adaptor
DSP600 and HS400 Hexagonal or HS401 High-Definition Alignment Targets remain centered while the technician clamps the adaptor to the rim. |
175-321-1 DSP500-Series Adaptor
Hunter’s Conventional DSP500 Alignment Sensors remain centered while the technician clamps the adaptor to the rim. Center castings may be adjusted for a clear line of sight between the front toe sensors. |
|
|
175-325-1 Adaptor
DSP600 and HS400 Hexagonal or HS401 High-Definition Alignment Targets remain centered while the technician clamps the adaptor to the rim.  |
 |
|
 20-1558-1 Tire Clamp Adaptor Compatible only with 175-200-1, 175-285-1, 175-304-1 and 175-305-1 Self-Centering Adaptors. Grips tire tread (21” - 40” tire O.D.). |
 20-1559-1 Upgrade Kit for Tire Clamp Adaptor Kit 20-1108-1 Replaces the current tire hooks on Kit 20-1108-1, increasing maximum tire range from 28 to 40 inches. Compatible only with 175-200-1, 175-285-1, 175-304-1 and 175-305-1 Self-Centering Adaptors. |
|
| 20-1792-1 28” Wheel Adaptor Extensions Extensions increase the Self-Centering Wheel Adaptor’s maximum rim range from 24.5” (622 mm) to 28” (711 mm). Compatible with 175-321-1 and 175-325-1 Self-Centering Adaptors.  (Kit 20-1792-1 contains 16 pieces, four for each adaptor.) |
 |
|
| 175-348-1 | BMW Quick Clamp Adaptor | Hunter Quick Clamp Adaptor approved by BMW. BMW special adaptors with large tire hooks and 120 mm pins. For use with all HawkEye HS401 and DSP sensors. | ||
| 175-214-1 | BMW Quick Clamp Adaptor | Hunter Quick Clamp Adaptor approved by BMW. BMW special adaptors with large tire hooks and 100 mm pins. For use with all HawkEye HS401 and DSP sensors. (Replacement only for older installations. For new installations, use 175-348-1.) | ||
| 175-349-1 | Mercedes-Benz Clamp Adaptor | Hunter Quick Clamp Adaptor approved by Mercedes-Benz. Mercedes-Benz special adaptors with large tire hooks and 100 mm pins. For use with all HawkEye HS401 and DSP sensors. | ||
| 175-215-1 | Mercedes-Benz Clamp Adaptor | Hunter Quick Clamp Adaptor approved by Mercedes-Benz. Mercedes-Benz special adaptors with large tire hooks and 100 mm pins. For use with all HawkEye HS401 and DSP sensors. (Replacement only for older installations. For new installations, use 175-349-1.) | ||
| 20-1867-1 | BMW 120 mm Pin Kit | 120 mm pins are standard on 175-348-1 Quick Clamp Adaptors. May also be used with 175-214-1 Quick Clamp Adaptors for some specialty wheels with deeper offsets (one kit covers four adapters). | ||
| 20-1329-1 | Mercedes-Benz 100 mm Pin Kit | Use with Mercedes-Benz Clamp Adaptors 175-349-1 and 175-215-1 (one kit covers one adaptor). | ||
| 20-1857-1 | Long Hooks for Special Adaptors | Long hooks for BMW and Mercedes-Benz Clamp Adaptors. May be used with 175-214-1 and 175-215-1 Clamp Adaptors. Standard on 175-348-1 BMW Quick Clamp Adaptors. | ||
| 20-1842-1 | Adaptor Upgrade Kit for HS401, HS400, DSP600 and DSP400 Sensors | For mounting to sensor columns. Includes four 175-325-1 Self-Centering Adaptors (clamping range 10” - 24.5”), four storage brackets and mounting hardware. | ||
| 20-1841-1 | Adaptor Upgrade Kit for HS401, HS400, DSP600 and DSP400 Sensors | For mounting to aligner cabinet or wall. Includes four 175-325-1 Self-Centering Adaptors (clamping range 10” - 24.5”), four storage brackets and 20-1822-1 Instrument Support Adaptor Plate Kit. | ||
| 20-1097-1 | Wheel Adaptor Extensions | Increases maximum wheel diameter on Self-Centering Adaptors by 2 1/2 inches. Compatible with Self-Centering Adaptors 175-200-1, 175-285-1, 175-304-1 and 175-305-1. | ||
| 20-1898-1 Rim Stud Retainers
Rim Stud Retainers for mounting adaptors. Compatible with all current production slip-on spade sleeves. Standard and compatible only with 175-321-1 and 175-325-1 Self-Centering Adaptors (one kit covers two adaptors). |
 |
20-823-1 Rim Stud Extension Kit Includes eight Rim Stud Extensions (134-81-1) (one kit covers two adaptors). |
 |
|
| 20-1522-1 Spade Sleeve Kit Includes eight Rim Guard Tire Sleeves (106-118-2) (One kit covers two adaptors). |
 |
20-831-1 Spade Sleeve Kit Includes eight Rim Stud Sleeves (106-70-2). Standard with 175-34-1 and 175-325-1 Self-Centering Adaptors (one kit covers two adaptors). |
 |
|
| 20-551-1 Spade Sleeve Kit Includes eight Rim Stud Sleeves (106-70-2) and eight Storage Plug Assemblies (one kit covers two adaptors). |
 |
20-1688-1 Additional Rim Stud Retainers For 16” - 20” wheel adaptors. Includes eight Rim Stud Retainers (one kit covers two adaptors). |
 |
|
| 20-1578-1 Mag Wheel Short Kit Includes four Mag Assembly Adaptors (175-63-3) (One kit covers one adaptor). |
 |
20-550-1 Rubber Pad Sleeve Kit Includes four each of the following: 175-37-3 Mag Assembly Adaptor and 175-63-3 Mag Assembly Adaptor (one kit covers two adaptors). |
 |
|
| 20-1770-1 | Instrument Support Kit | Set of four brackets mount to DSP600 or DSP400 columns. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Compatible only with 175-321-1 and 175-325-1 Self-Centering Adaptors. | ||
| 20-1762-1 | Instrument Support Adaptor Plate Kit | Set of four adaptor plates allow DSP500 hangers to be mounted to alignment cabinets that only have mounting holes for older, horseshoe-style sensor supports. Does not include DSP500 Sensor hangers. | ||
| 20-1899-1 | Instrument Support Kit | For use with Mercedes-Benz and BMW Quick Clamp Adaptors and DSP500 Sensors. | ||
| 20-1427-1 | Instrument Support Kit | Set of four brackets mount to two-post and four-post Hunter lift rack columns. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Compatible only with 175-200-1, 175-285-1, 175-304-1 and 175-305-1 Self-Centering Adaptors. | ||
| 20-1822-1 | Instrument Support Adaptor Plate Kit | Set of four adaptor plates allow 20-1770-1 Bracket Kit to be mounted to walls or alignment cabinets. Does not include 20-1770-1 Kit. | ||
| 20-1900-1 | Instrument Support Kit | For use with Mercedes-Benz and BMW Quick Clamp Adaptors and HawkEye HS401 and DSP600 Sensors. | ||
| 20-1446-1 | Safety Hook Assembly | Set of four, compatible with 39-22-1, 39-25-1, and 39-44-1 safety cables. Includes four Safety Cable Hook Assemblies (216-58-1). | ||
| 20-2193-1 | Instrument Support Kit | Set of four adaptor plates allow HS401 or HS400 hangers to be mounted to walls or alignment cabinets. Does not include sensor hangers. | ||
| 20-2187-1 | Instrument Support Plate Kit | Set of four brackets mount to HS401 or HS400 columns. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Compatible only with 175-321-1 and 175-325-1 Self-Centering Adaptors. | ||
|
For pricing and ordering
information on Alignment Systems or other
Hunter products, contact your local Hunter representative. See the
representative locator
or contact Hunter Engineering
Company. To receive a quote on this equipment, go to Get-A-Quote. |
