Hunter Engineering Company Logo
SEARCH:

Wheel Balancer Accessories

Precision Centering Accessories
for GSP & DSP Series Wheel Balancers
20-1839-1 Adjustable Flange Plate & Stud Kit

20-1839-1 Adjustable Flange Plate & Stud Kit

 

 

Watch a Flash Video Demonstration

20-1839-1 Adjustable Flange Plate & Stud Kit
The preferred recommendation when choosing a flange plate kit for maximum application coverage. Single-plate sliding bolt circle design with interchangeable pins provides quick setup and universal fitment. The kit adapts to 3-, 4-, 5-, 6-, 7- and 8-lug bolt circles with infinite adjustability. Fits future vehicle bolt circles that have yet to be released.

The maximum bolt circle diameter is 6.70” (170 mm) and minimum diameter is 3.85” (98 mm). The kit contains much fewer pieces and is more economical than multiple flange plate kits. All pins use compressible studs allowing more accurate centering when clamping on uneven wheel lug seat surfaces. This mounting method is the most accurate of all choices.

Kit includes:

  • A. 175-355-1 Adjustable Flange Plate with Locking Knob
  • B. 106-143-2 1” diameter Conical End Pin Sleeve (7); [Shown with 135-378-1 Pin Assemblies (7)]
  • C. 106-145-2 3/4” diameter Conical End Pin Sleeve (5)
  • D. 106-144-2 7/8” diameter Spherical End Pin Sleeve (5)

Not Shown:

  • 67-676-1 Pin storage rack (Pictured with 20-1879-1 Shown Here)
The Advantage of Using Direct-Fit Collets

Precise wheel balancing relies on two critical conditions, (A) accurate center mounting and (B) distortion-free clamping while providing cosmetic wheel protection. To accurately mount a wheel, the center of the wheel must first be properly located on the balancer shaft. Contrary to popular belief, hub-centric and lug-centric wheels all use the hub bore as the center locating position of the wheel.

Traditional high-taper, deep-depth cones often fail to fit properly within the bore of the wheel. The actual bore of the wheel (not the bore chamfer) is where centering takes place when the wheel is mounted on a vehicle. Many modern aluminum wheel designs cannot be properly mounted with traditional cones.
The Advantage of Using Direct-Fit Collets
The low-taper of a direct-fit, dual-taper collet (versus the high-taper cone) offers better hub bore contact and prevents bottoming out on outer hubcap bore designs.
Take Your Wheel Balancing Accuracy to the Next Level With HunterPro…
20-1847-1 HunterPro Precision Wheel Centering Kit**†
Hunter’s Precision Centering Kit provides the most precise and repeatable wheel centering on the broadest range of applications. The new high-performance flange plate and double-ended direct-fit collets enable accurate center mounting of the wheel and distortion-free clamping to the adaptor quickly, easily, and without damaging the wheel.

Kit includes:

  • A. 20-1845-1 Direct-Fit Collet Kit: Passenger Car/Light Truck
  • B. 20-1839-1 Adjustable Flange Plate & Stud Kit
20-1847-1 HunterPro Precision Wheel Centering Kit**†
…Or Build Your Own Kit to Better Meet Your Service Needs
20-1845-1 Direct-Fit Collet Kit: Passenger Car / Light Truck (up to 1/2 ton)
Range: 2.100”-3.525” (53 mm-90 mm)

Kit includes:

  • A. 192-154-2 2.100”-2.325” (53 mm-59 mm)
  • B. 192-155-2 2.250”-2.475” (57 mm-63 mm)
  • C. 192-156-2 2.400”-2.625” (61 mm-67 mm)
  • D. 192-157-2 2.550”-2.775” (65 mm-70 mm)
  • E. 192-158-2 2.700”-2.925” (69 mm-74 mm)
  • F. 192-159-2 2.850”-3.075” (72 mm-78 mm)
  • G. 192-160-2 3.000”-3.225” (76 mm-82 mm)
  • H. 192-161-2 3.150”-3.375” (80 mm-86 mm)
  • I. 192-162-2 3.300”-3.525” (84 mm-90 mm)
  • J. 20-1930-1 Cone Selection Gauge

 20-1845-1 Direct-Fit Collet Kit: Passenger Car / Light Truck (up to 1/2 ton)
20-1846-1 Direct-Fit Collet Kit: 3/4 Ton / Import
Range: 3.600”-5.175” (91 mm-131 mm).

Kit includes:

  • A. 192-164-2 3.600”-3.825” (91 mm-97 mm)
  • B. 192-167-2 3.750”-3.975” (95 mm-101 mm)
  • C. 192-168-2 3.900”-4.125” (99 mm-105 mm)
  • D. 192-169-2 4.050”-4.275” (103 mm-109 mm)
  • E. 20-1931-1 Cone Selection Gauge
  • F. 192-170-2 4.200”-4.425” (107 mm-112 mm)††
  • G. 192-172-2 4.500”-4.725” (114 mm-120 mm)††
  • H. 192-173-2 4.650”-4.875” (118 mm-124 mm)††
  • I. 192-174-2 4.800”-5.025” (122 mm-128 mm)††
  • J. 192-175-2 4.950”-5.175” (126 mm-131 mm)††

 20-1846-1 Direct-Fit Collet Kit: 3/4 Ton / Import
20-1879-1 Collet Storage Rack Kit
20-1879-1 Collet Storage Rack Kit
Provides organized storage and easy accessibility for direct-fit collets on the GSP9700, GSP9600 and DSP9600 balancers.

(Shown with optional 67-676-1 Pin Storage Rack.)
214-122-2 Cone Application Guide
214-122-2 Cone Application Guide
Cone identification flip-chart includes most vehicle applications and the recommended cone size choices that likely will fit the OE wheel.

Also includes data on wheel weight type and lug nut torque specs. Standard on DSP9600 balancers.

 

** Patent Pending
† For CD Video demonstration request form 5096T.
††192-170-2 and larger collets must be used with spacer 46-433-2.

Ordering Information
For pricing and ordering information on Wheel Balancers or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

Also Available


Hunter Wheel Balancers

Click Here for Information
© Hunter Engineering Company