|
|
Wheel Balancer Accessories For Hunter GSP and DSP Wheel Balancers
|
20-1602-1 TruckChuck™ Wheel and Drum Balancing Kit**
Three-Jaw Chuck Adaptor for factory steel and some aluminum wheels with centering holes from 3.13" to 7.13". Offers the advantage of high centering accuracy and optimum balance repeatability combined with speed and ease of setup.
Kit Includes:
A. 175-286-2 Three-Jaw Chuck Adaptor
Shown with 20-1603-2 Jaw Kit.
B. 20-1854-2 Heavy-Duty Extended Jaw Kit
For wheels with centering holes from 5.13" to 9.13".
C. 175-296-2 Clamp Cup
Shown with 106-127-2 ALU Protective Sleeve. |
|
The TruckChuck™ balancing kit is used on the mounting pad side of medium-duty and light-truck wheels. |
| |
|
Benefits of Using the TruckChuck™ Kit:
- Centering accuracy is not affected by the weight of wheel.
- Does not require lifting wheel while tightening wing nut.
- Mounting chuck inside offset “duallie” wheels helps support
wheel vertically during clamping.
- Centering accuracy is dramatically improved with jaw contact
at actual pilot diameter.
- Large range of pilot diameters are supported with a single adaptor.
- Balanced three-jaw chuck features a forged steel body, hardened bore, hardened jaw slides, hardened jaws and hardened gears.
- No spacer required in most applications.
- Installs with a 3/8" ratchet.
**Patent Pending |
|
The TruckChuck™ balancing kit allows the operator to easily mount and check large drums for imbalance. |
| |
|
|
|
|
|
