Hunter Engineering Company Logo

SEARCH:

GSP9700 Road Force Measurement System

Dataset® Arms Speed Floor-to-Floor Cycle Time
Inner Dataset® Arm   Automatic Double Dataset® Arms
 
Inner Dataset® arm determines exact placement for weights and allows automatically measures weight positions on wheels up to a 30” (762 mm) diameter.   Inner and Outer Dataset® arms speed wheel data direct-measure input and placement of clip-on or adhesive weights, increasing accuracy and allowing more single-spin balances.


Automatic Weight Mode & Location Detection
This feature eliminates the need for the technician to select balance modes, reducing service time and possible mode entry error. Balance mode is selected automatically based on the position chosen for the Inner Dataset arm or Outer Dataset arm.

 
When the technician places the Inner Dataset® arm DOWN inside the wheel, the balancer automatically selects “Tape-Weight Mode”.   When the technician places the Inner Dataset® arm UP on the wheel, the balancer automatically selects “Clip-Weight Mode”.

Rim Scan Feature**
 
Patch Balancing® Feature
The inner Dataset arm will trace the exact wheel contour and store the scanned distances and diameters for all available tape weight locations selected by the operator. Rim Scan also offers the benefits of Automatic Weight Positioning to increase the capability to single-spin balance with SmartWeight® technology.  
The perfect choice for oversized custom wheels and tires. With 4x4 and street cruiser tire weights growing in size, with the Patch Balancing® feature solves excessive lead or adhesive weight balance problems by using weighted patch(s) inside the tire. Rim-mounted weights can be reduced or eliminated. Increase profits by balancing oversize tires that others turn away.

Optional AutoClamp Feature**
 
CenteringCheck® Feature*Centering Check Feature
The optional AutoClamp is positioned and tightened automatically saving time and effort. There are no time-consuming shaft threads to take up and no additional wing nut tightening is required.  
This patented feature, exclusive to Hunter wheel balancers, ensures that the wheel is properly centered when mounted on the balancer, eliminating guesswork when choosing mounting accessories or set-up errors on problematic wheels.
Hide, Reduce or Move Weight Positions to Alternative Locations


SmartSpoke™ Weight Locator Feature**
Derived from SmartWeight® balancing, the SmartSpoke™ weight locator feature exclusively enables the technician to achieve the best possible balance by placing only a single adhesive weight behind one wheel spoke instead of two weights behind two spokes. This feature reduces weight use, minimizes labor time and speeds the balance procedure.

The SmartSpoke balance results consumed 49% less correction
weight and significantly less labor time.

Without the SmartSpoke feature more weight and labor time is consumed.

Split Clip-Weight™ Mode*

- Exclusive Split Clip-Weight™ mode key splits the clip weight into two smaller weights and relocates them on the wheel. Repeated use of the key presents multiple split-weight choices.

- Eliminate weight inventory over 2.25 oz. increments on passenger-car, SUV and light-truck applications.

- Shift the weight position to avoid obstructions, such as trim ring clips.

 

Servo Stop and Servo Push Drive Control*
 
BDC Adhesive Weight Placement Laser

Servo Stop automatically rotates and holds the wheel at the desired top-dead-center clip-weight or bottom-dead-center adhesive-weight location. Servo Push operates with a push of the wheel, automatically rotating the wheel to the next weight placement position.
  Activated by the ServoDrive™ system, the BDC laser line automatically identifies the bottom-dead-center position for fast adhesive-weight application. Helps guide operator to optimal location for correct weight placement.
Integrated Wheel Lift System
Increase Productivity and Improve Accuracy
Hunter’s optional integrated Wheel Lift System helps technicians safely service today’s oversized custom, light-truck, and medium-duty commercial wheels quickly and easily.

26-inch Tire & Wheel assembly

Quick Cal-Check® Calibration Feature*
 
Spindle-Lok® Brake Feature
Just attach the calibration weight and press “start”. In just a few seconds, this patented and exclusive feature confirms balancer calibration.   Tapping the foot brake activates entry and storage of wheel data. The foot brake also locks the spindle for easier tightening and loosening of the wing nut.

* Patented feature
** Patent pending

Pricing and Ordering
For pricing and ordering information on Wheel Balancers or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.