|
|
Exclusive Features Make Expert Balancing Easier and Faster |
Optional AutoClamp Feature**
|
|
CenteringCheck® Feature*
|
 |
|
 |
| |
|
|
The optional AutoClamp is positioned and tightened automatically saving time and effort. There are no time-consuming shaft threads to take up and no additional wing nut tightening is required.
|
|
This patented feature, exclusive to Hunter wheel balancers, ensures that the wheel is properly centered when mounted on the balancer, eliminating guesswork when choosing mounting accessories or set-up errors on problematic wheels.
|
Hide, Reduce or Move Weight Positions to Alternative Locations
SmartSpoke™ Weight Locator Feature**
Derived from SmartWeight® balancing, the SmartSpoke™ weight locator feature exclusively enables the technician to achieve the best possible balance by placing only a single adhesive weight behind one wheel spoke instead of two weights behind two spokes. This feature reduces weight use, minimizes labor time and speeds the balance procedure.
The SmartSpoke balance results consumed 49% less correction weight and significantly less labor time.
Without the SmartSpoke feature more weight and labor time is consumed.
Split Clip-Weight™ Mode*
- Exclusive Split Clip-Weight™ mode key splits the clip weight into two smaller weights and relocates them on the wheel. Repeated use of the key presents multiple split-weight choices.
- Eliminate weight inventory over 2.25 oz. increments on passenger-car, SUV and light-truck applications.
- Shift the weight position to avoid obstructions, such as trim ring clips.
|
|
 |
| |
|
|
Servo Stop and Servo Push Drive Control*
|
|
BDC Adhesive Weight Placement Laser
|
 |
|
 |
| |
|
|
- Servo Stop automatically rotates and holds the wheel at the desired top-dead-center clip- weight or bottom-dead-center adhesive-weight location.
- Servo Push operates with a push of the wheel, automatically rotating the wheel to the next weight placement position.
|
|
- Activated by the ServoDrive™ system, the BDC laser line automatically identifies the bottom- dead-center position for fast adhesive-weight application.
- Helps guide operator to optimal location for correct weight placement.
|
Quick Cal-Check® Calibration Feature*
Just attach the calibration weight and press “start”. In just a few seconds, this patented and exclusive feature confirms balancer calibration.
Spindle-Lok® Brake Feature
 |
|
 |
| |
|
|
The Spindle-Lok® Brake feature and Dataset® arms aid in minimizing floor-to-floor time – up to 40% faster than major competitors’ wheel balancers.
|
|
Tapping the foot brake activates entry and storage of wheel data. The foot brake also locks the spindle for easier tightening and loosening of the wing nut.
|
|
* Patented ** Patent Pending
|
|
More Information
Learn about SmartWeight™ Balancing Technology, A Patented Feature of Hunter GSP Wheel Balancers
WeightSaver.com
|
