Hunter Brake Lathe Packages and Accessories

Brake Lathe Packages and Accessories
For Hunter OCL Series and BL500 Brake Lathes

Standard HunterPro™ Package Accessories†
Included with purchase of BL505/BL501 AB/A models.

A. Arbor, 1", BL505 - 97-422-2
B. HunterPro Wrenchless - 76-377-2

Self-Aligning Nut
C. Belt Drive, 1/2" V-Type - 126-42-2
D. Eye Shield, Lamp Mounted - 179-27-2
E. Safety Glasses - 179-15-2
F. Tool, 5/16" Wrench - 221-604-2
G. Tool, 1" and 1-3/8" Wrench - 221-605-2
H. Inserts, Positive Rake - 221-640-3
(0.015" Radius Tip), 24-Pack

Standard HunterPro™ Package Accessories†

Basic BL500 Series Standard Accessories†
Included with purchase of BL505/BL501 models.

Basic BL500 Series Standard Accessories†

A. Clamp Cup, 5.75" (2 ea.) - 175-231-2
B. Clamp Cup, 4.50" (2 ea.) - 175-233-2
C. Silencer, Drum Band - 175-186-2
D. Belt Drive, 1/2" V-Type - 126-42-2
E. Tool, 1" and 1-3/8" Wrench - 221-605-2
F. Tool, 5/16" Wrench - 221-604-2
G. Safety Glasses - 179-15-2
H. Silencer, Vented Rotor, - 175-276-1

Spring-Type
I. Silencer, Rotor Solid - 175-189-2
J. Spacer, 0.50" - 46-439-2
K. Spacer, 1.00" - 46-440-2
L. Spacer, 4.00" - 46-513-2
M. Eye Shield, Lamp Mounted - 179-27-2
N. Dual Taper Adaptor, - 175-308-2

1.10" – 1.60"
O. Dual Taper Adaptor, - 175-309-2

1.20" – 1.70"

P. Dual Taper Adaptor, - 175-310-2
1.60" – 2.10"
Q. Dual Taper Adaptor, - 175-311-2
1.90" – 2.50"
R. Dual Taper Adaptor, - 175-312-2
2.30" – 2.90"
S. Cone, 1.44" – 2.75" - 192-111-2
T. Cone, 2.75" – 3.25" - 192-112-2
U. Cone, 3.06" – 4.00" - 192-113-2
V. Spring - 98-345-2
W. Silencer, Clip-On Disc - 175-185-2
and Chip Deflector
X. Inserts, Positive Rake - 221-639-3
(0.015" Radius Tip), 4-Pack
Y. Arbor, 1", BL505 - 97-422-2
Z. Arbor Nut, 1" (not shown) - 76-338-2

† Accessory kits shown also apply to Hunter’s BL501 Lathes.

Build the HunterPro Lathe Package to match your service needs by selecting a required adaptor kit from the list below.

The adaptor kits (Levels I through IV) may also be used to upgrade any existing lathe using a 1” arbor.

LEVEL I – HunterPro Passenger Car Adaptor Kit: 20-1665-1 Consists of hubbed and hubless adaptors covering a wide range of applications fitting most passenger car rotors, drums and flywheels, including composites. Kit includes: A. HunterPro Automotive Kit - 20-1661-3 B. Silencer, Drum Band - 175-186-2 C. Silencer, Solid Rotor, Chain-Type - 222-38-2 D. Silencer, Clip-on Disc - 175-185-2 and Chip Deflector E. Silencer, Vented Rotor, - 175-276-1 Spring-Type F. Spacer, 0.50" - 46-439-2 G. Spacer, 1.00" - 46-440-2 H. Spacer, 4.00" - 46-513-2 I. Dual Taper Adaptor, 1.10" – 1.60" - 175-308-2 J. Dual Taper Adaptor, 1.20" – 1.70" - 175-309-2 K. Dual Taper Adaptor, 1.60" – 2.10" - 175-310-2 L. Dual Taper Adaptor, 1.90" – 2.50" - 175-311-2 M.Dual Taper Adaptor, 2.30" – 2.90" - 175-312-2		BL505D shown with optional Wrenchless Self-Aligning Nut.

LEVEL II – HunterPro Passenger Car & Light Truck Adaptor Kit: 20-1666-1 Consists of hubbed and hubless adaptors covering a wide range of applications fitting most passenger cars and light truck rotors, drums and flywheels through 1/2-ton chassis, including composites. Kit includes: A. HunterPro Automotive Kit - 20-1661-3 B. HunterPro Light Truck Kit - 20-1662-3 C. Silencer, Solid Rotor, Chain-Type - 222-38-2 D. Silencer, Clip-on Disc - 175-185-2 and Chip Deflector E. Silencer, Drum Band - 175-186-2 F. Silencer, Vented Rotor, - 175-276-1 Spring-Type G. Spacer, 0.50" - 46-439-2 H. Spacer, 1.00" - 46-440-2 I. Spacer, 4.00" - 46-513-2		J. Dual Taper Adaptor, 1.10" – 1.60" - 175-308-2 K. Dual Taper Adaptor, 1.20" – 1.70" - 175-309-2 L. Dual Taper Adaptor, 1.60" – 2.10" - 175-310-2 M. Dual Taper Adaptor, 1.90" – 2.50" - 175-311-2 N. Dual Taper Adaptor, 2.30" – 2.90" - 175-312-2 O. Dual Taper Adaptor, 2.70" – 3.20" - 175-313-2 P. Dual Taper Adaptor, 3.10" – 3.60" - 175-314-2

LEVEL III – QuickChuck™ Passenger Car, Light Truck & Larger Light Truck Adaptor Kit: 20-1667-1 Consists of hubbed and hubless adaptors and three-jaw chuck mounting system. Covers a wide range of applications for most rotors, drums and flywheels for passenger cars, light trucks and larger light trucks. Kit includes: A. Cup, Extra Large, 7.25" - 175-192-2 B. Cup, 5.75" - 175-231-2 C. Cup, 4.50" - 175-233-2 D. Cone, 1.44" – 2.75" - 192-111-2 E. Spring - 98-345-2 F. Three-Jaw Chuck Kit - 20-1273-1 G. Jaw Set (Only) - 20-1274-2 Truck Size: 3.63" – 5.75" H. Spacer, 0.50" - 46-439-2 I. Spacer, 1.00" - 46-440-2 J. Spacer, 4.00" - 46-513-2 K. Adaptor, Drum, Deep 1-ton - 175-236-1 (3.75" friction surface & wider) L. Silencer, Clip-on Disc - 175-185-2 M.Silencer, Drum Band - 175-186-2 N. Silencer, Solid Rotor, Chain-Type - 222-38-2 O. Silencer, Vented Rotor, -175-276-1 Spring-Type and Chip Deflector		P. Dual Taper Adaptor, 1.10" – 1.60" - 175-308-2 Q. Dual Taper Adaptor, 1.20" – 1.70" - 175-309-2 R. Dual Taper Adaptor, 1.60" – 2.10" - 175-310-2 S. Dual Taper Adaptor, 1.90" – 2.50" - 175-311-2 T. Dual Taper Adaptor, 2.30" – 2.90" - 175-312-2 U. Dual Taper Adaptor, 2.70" – 3.20" - 175-313-2 V. Dual Taper Adaptor, 3.10" – 3.60" - 175-314-2

LEVEL IV - HunterPro Passenger Car, Light-Truck & Larger Light Truck Adaptor Kit: 20-1668-1 Consists of hubbed and hubless adaptors covering a wide range of applications for most passenger cars, light truck and larger light trucks, including composites. Kit includes: A. HunterPro Light - 20-1663-3 and Medium-Duty Truck Kit B. HunterPro Light Truck Kit - 20-1662-3 C. HunterPro Automotive Kit - 20-1661-3 D. Spacer, 0.50" - 46-439-2 E. Spacer, 1.00" - 46-440-2 F. Spacer, 4.00" - 46-513-2 G. Adaptor, Drum, Deep 1-ton - 175-236-1 (3.75" friction surface and wider) H. Silencer, Vented Rotor, -175-276-1 Spring-Type I. Silencer, Drum Band - 175-186-2 J. Silencer, Solid Rotor, Chain-Type - 222-38-2 K. Silencer, Clip-on Disc - 175-185-2 and Chip Deflector L. Adaptor, Rotor, ‘92 – Current 3/4 - 20-1424-1 to 1-ton GM 4WD; ‘94 – Current 3/4- to 1-ton Dodge 2WD and 4WD (includes 192-116-2 Small Cone, 1.31" – 1.75")		M.Dual Taper Adaptor, 1.10" – 1.60" - 175-308-2 N. Dual Taper Adaptor, 1.20" – 1.70" - 175-309-2 O. Dual Taper Adaptor, 1.60" – 2.10" - 175-310-2 P. Dual Taper Adaptor, 1.90" – 2.50" - 175-311-2 Q. Dual Taper Adaptor, 2.30" – 2.90" - 175-312-2 R. Dual Taper Adaptor, 2.70" – 3.20" - 175-313-2 S. Dual Taper Adaptor, 3.10" – 3.60" - 175-314-2 T. Tool Holder, Drum, Med. Duty - 175-339-2 Truck Parking Brk. (not shown)

Ordering Information

For pricing and ordering information on Lathes or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

WHAT'S NEXT?