Multi-Service Lift

Specifications
Maximum vehicle gross weight
Single-Post Twin-Post	8,000 lbs. (3629 kg) 8,000 lbs. (3629 kg)

Maximum wheelbase
	Standard Length	Extended Length
General service 2-wheel alignment 4-wheel alignment	152” (3861 mm) 139” (3531 mm) 138” (3505 mm)	174” (4420 mm) 161” (4089 mm) 138” (3505 mm)

Minimum 4-wheel alignment: 88” (2235 mm)

Alignment height: 36” (914 mm) Standard (except D1-M is 30” standard). All models available in optional 30” (762 mm) or 24” (610mm)

Tread Width
Minimum inside Maximum outside	40” (1016 mm) 79” (2007 mm)

Shipping weight (without jacks)
	Standard Length	Extended Length
D1 D2	2400 lbs. (1089 kg) 2400 lbs. (1089 kg)	2600 lbs. (1179 kg) 2500 lbs. (1134 kg)

Standard Equipment
Two standard-length, 36” (914 mm) approach ramps Four leveling legs, 36” (914 mm), (except D1-L, 30”) Two rear ramp stops Two wheel chocks Four down-position leveling screws Two retractable work steps with skid protection Built-in formed rub rails Built-in full-length jack rails 59” (1499 mm) rear slip plates, flush mounted with tethered lock pins Floor protectors for leveling legs and leveling screws Mounting hardware kit Built-in turnplate pockets Pre-drilled for communications interface kit Pre-drilled for air line kit

Options
20-593-1 Communications Interface Kit 20-996-1 Air Line Kit 25-140-1 Turnplate, 14” (356 mm) (2 required)* 25-129-1 Stainless Steel Turnplates (2 required)* 46-372-1 Front Filler Plate, (2 required) 20-1403-1 Jack Riser Kit 133-35-1 Swing Air Jack Assembly 133-63-1 Air-Actuated Power Jack Assembly 20-1249-1 Wear Detector Plates 213-47-2 Drive-On Mirror *Available with Hunter wheel alignment systems

Models
D1-M Standard Length Single-Post Rack D2-M Standard Length Twin-Post Rack D1-L Extended Length Single-Post Rack D2-L Extended Length Twin-Post Rack 209-43 D1-M with (2) Swing Air Jacks 209-59 D2-M with (2) Swing Air Jacks 209-70 D2-M with (2) Air-Actuated Power Jacks 209-71 D1-M with (2) Air-Actuated Power Jacks -L Add to model number for Extended Length Rack (i.e. 209-70-L) -DT Add to model number for drive-thru capability Available at extra cost; see form 700D-SYS. Because of continuing technological advances, specifications, models and options are subject to change without notice. NOTICE: Product delivered to international markets may differ slightly in content to domestic product. Please consult your local distributor for details.

Ordering Information

For pricing and ordering information on Racks or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

WHAT'S NEXT?

Multi-Service Lift

NOTICE: