RX Scissor Lift Rack

Large capacity rack with a small footprint!

Video requires Flash Player 8 or greater. Please consider upgrading or installing the Flash player. Installation generally takes less than one minute.

See a Flash animation demonstrating
the operation of the RX

Click the numbered links for details on RX scissor lift features.

See a Flash animation demonstrating the operation of the RX.

PowerSlide^® System for RX-Series Lifts

Video requires Flash Player 8 or greater.
Please consider upgrading or installing the Flash player.
Installation generally takes less than one minute.

The new PowerSlide® slipplate locking mechanism secures rear wheel slipplates with the touch of a button. The technician no longer has to struggle to remove and replace slipplate pins for every alignment. Optional PowerSlide turnplates that lock and unlock the turnplates are also available.

The PowerSlide system automatically locks slipplates and optional PowerSlide turnplates when lowering lift. Eliminates technicians driving off lifts with unsecured pins, greatly reducing a leading cause of lift damage and repair expense.

Hunter lifts equipped with the PowerSlide system also include specially designed low-angle approach ramps for low-clearance vehicles. Two-stage ramps are standard on RX12XL-PS, RX12L-PS and RXDC, optional on RX9L-PS and RX40 models.

PowerSlide turnplate saves time by eliminating time-consuming trips around vehicle pulling out and putting back locking pins.

PowerSlide system controls are conveniently located on the lift console. One touch locks or unlocks the slipplates and optional turnplates. Automatically locks plates when lowered. An indicator light shows if plates are locked or unlocked.

PowerSlide^® System Combined With Camera Sensors Saves Time and Effort During Alignment

power slide reduces trips around the car

Traditional alignment sensor setup requires many time-wasting trips around the car.

power slide reduces trips around the car

A Hunter lift equipped with PowerSlide slipplates, combined with camera sensors, allows the technician to make significantly fewer trips around the vehicle, greatly reducing alignment setup time.

When connected to an FIA-ready console, slipplates and turnplates lock and unlock automatically at the correct times during the alignment process.

PowerSlide^® is available on these lifts:

RX12XL-PS
RX12L-PS
RX9L-PS
RX DC
RX40 (non-USA model)
RX12XL-IS
RX12L-IS
RX9L-IS

For flush mount applications, add "-P" suffix.
All PowerSlide groups include swing-air jacks.

Optional Inflation Station

Inflation Station allows you to save time by doing other things during the tire-filling process. Actual
time to fill all four tires will not be appreciably faster or slower than a technician doing one tire at a time with a fill hose and gauge. Inflation pressure limited to 60 psi max.

Inflation Station is available on these lifts:

RX12XL-IS
RX12L-IS
RX9L-IS

Pressure may be set on a per axle basis. All Inflation Station racks include PowerSlide locking slipplates.

Inflation Station automatically detects being connected and begins filling or bleeding one tire or all four, depending on the preselected tire pressure.

Each air hose is a flexible coil with a retaining clip on the chuck. Storage is provided on the side of the lift for each tire position.

Optional Air Jacks for Hunter Alignment Lift Racks

133-69-1
6,000-lb. capacity Swing Air Jack (RX-12)

133-67-1
4,500-lb. capacity Swing Air Jack (RX-9)

Optional Hunter Air Jacks add capabilities for lifting vehicles off the runways during alignment procedures and other multi-service operations.

The Heavy Duty Swing Air Jack (for use with the RX-12) has a capacity of 6,000 lbs. (2722 kg). Swing Air Jacks or Air-Actuated Power Jacks (for use with the RX-9) have a capacity of 4,500 lbs. (2041 kg).

Video requires Flash Player 8 or greater. Please consider upgrading or installing the Flash player. Installation generally takes less than one minute.

133-63-1
4,500-lb. capacity Air-Actuated Power Jack (RX-9)

Optional AlignLights Lift Accessory

Video requires Flash Player 8 or greater.
Please consider upgrading or installing the Flash player.
Installation generally takes less than one minute.

Hunter’s AlignLights lift lighting accessory provides a safe and efficient light source underneath the vehicle. AlignLights are powered by the main lift power source and require no additional or exposed electrical cords. For efficiency, the lights automatically switch on when the lift is raised and off when the lift is lowered.

For RX-12 and RX-9. 20-2173-1

RX-P Flush-Mount Scissors Rack

The RX Scissor Rack may also be installed flush-mounted in a shallow pit. No more worries about lowered vehicles or expensive spoilers! This very tidy installation is ideal for “showcase” shops. See site requirements for installation details.


		The Hunter RX Scissor Lift Rack has been certified under the program conducted by Automotive Lift Institute (ALI) and ETL Testing Laboratories, to comply with Safety Standard ANSI/ALI ALCTV-1998 and Electrical Standard ANSI/UL 201.
Ordering Information For pricing and ordering information on Racks or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

RX Scissor Lift Rack

Video Demos