Hunter Engineering Company Logo

SEARCH:

Lift Accessories For Hunter Wheel Alignment Lift Racks

Turnplates
High-quality, free-moving turnplates are critical to performing accurate and fast alignments. Hunter offers many varieties of turnplates to meet every alignment need.
 
automatically locks slipplates
PowerSlide® Turnplate
PowerSlide turnplates eliminate the hassle of removing and replacing lock pins during an alignment. Integrated bridges lower and raise as plates are locked, making rolling compensation a snap. The air-operated control system ties directly into the PowerSlide lift. PowerSlide turnplates are an optional feature and may be added later to qualified RX-series lifts.
  • PowerSlide turnplate with automatic bridge: 20-2076-1
    Used with camera-based alignment sensors (2 required).
  • PowerSlide turnplate without automatic bridge: 20-2075-1
    Used with conventional alignment sensors (2 required).
 
low-angle approach ramps
Stainless Steel Turnplate
Resists corrosion and maintains free movement during the alignment procedure. Stainless steel construction for long, trouble-free life. No pointer.

Standard:

  • For 1.5" deep turnplate pocket, 2 required: 25-129-1
  • Set of (2) stainless steel turnplates for 50 mm turnplate pockets: 20-2114-1 (Includes bridge: 20-1963-1)
Low Friction:
  • Set of (2) stainless steel turnplates for 1.5" deep turnplate pockets: 20-1918-1
  • Set of (2) stainless steel turnplates for 50 mm turnplate pockets: 20-2113-1 (Includes bridge: 20-1963-1)
 
automatically locks slipplates
Electronic Turnplates†
Ideal for integrating advanced alignment angle measurements. Cast aluminum design with a powder-coated paint finish. 50 mm high.
  • Set of (2) electronic turnplates and cables to connect turnplates to wireless sensors: 20-1487-1
  • Set of (2) electronic turnplates, cables and board to connect turnplates to rack wiring kit: 20-1477-1
 
low-angle approach ramps
Electronic Wiring Cables: 20-1386-1
Set of (2) cables to connect turnplates to wireless sensors. Use this part number when ordering cables only.

Electronic Wiring Cable: 38-774-2

Cable to connect turnplate to rack wiring kit, 2 required. Use this part number when ordering cables only.

 
automatically locks slipplates
Wear Detector Turnplate
Simplifies pre-alignment inspection of the steering linkage and suspension components by exercising the steering system. Perform “Dry Park” inspections with only one technician.
  • Set of (2) turnplates for Four-Post models: 20-1248-1
  • Set of (2) turnplates for RM and D-rack models: 20-1249-1
  • Set of (2) turnplates for RMHD models: 20-1281-1
 
low-angle approach ramps
Standard Turnplates: 25-140-1
Standard turnplates for most alignment systems.
Steel construction with a powder-coated paint finish. No pointer. 1.5" high (2 required).
 
automatically locks slipplates
Turning Angle Gauge: 25-18-1
Standard turnplate with pointer and scale. Steel construction with a powder-coated paint finish. 1.5" high (2 required).
 
low-angle approach ramps
Filler Plates: 46-372-1
Fit into standard 1.5" turnplate pockets for times when turnplates are not used (2 required).
 
automatically locks slipplates
Turnplate Bridge
Eases rolling compensation when rack is used with camera- based alignment sensors.
  • 50 mm bridge: 20-1963-1 – For RX DC, RX40,
    and RX PowerSlide® lift groups.
  • 1.5" bridge: 20-1471-1 – For all other Hunter lift rack applications.
 
Ordering Information
For pricing and ordering information on Racks or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

  WHAT'S NEXT?

      Get-A-Quote

      Locate Sales Rep

    Locate Service Rep