Models

L441JT
L441 with (2) 9,000-lb. Swing Air Jacks and stainless steel turnplates

L441T-PS
L441 with (2) 9,000-lb. Swing Air Jacks and PowerSlide slipplates and turnplates

L441T-IS
L441 with (2) 9,000-lb. Swing Air Jacks, PowerSlide slipplates and turnplates, Inflation Station, and FIA

Standard Equipment

Stainless steel turnplates (PowerSlide turnplates on PS and IS models)
Flush-mounted, full-floating slipplates (PowerSlide slipplates on PS and IS models)
Louvered ramps with built-in wheel stops
Front wheel stops
Two wheel chocks
Two movable work steps
Built-in, full-length jack rails
Built-in rub rails
Built-in air line kit

Options

20-1365-1
17.5” Ramp Extension Kit (for low-clearance vehicles)

20-2033-1
40” Ramp Extension Kit (for extremely low-clearance vehicles or high-floor-slope situation)

Models

L444JT
L444 with (2) 9,000-lb. Swing Air Jacks and stainless steel turnplates

L444T-PS
L444 with (2) 9,000-lb. Swing Air Jacks and PowerSlide slipplates and turnplates

L444T-IS
L444 with (2) 9,000-lb. Swing AirJacks, PowerSlide slipplates and turnplates, Inflation Station, and FIA

Standard Equipment

Identical to L441 Lift Rack.

Options

Identical to L441 Lift Rack.

The Hunter L444 Lift has been certified under the program conducted by Automotive Lift Institute (ALI) and ETL Testing Laboratories, to comply with Safety Standard ANSI/ALI ALCTV-2006 and Electrical Standard ANSI/UL 201.

Two Swing Air Jacks
Hunter Swing Air Jacks add capabilities for lifting vehicles off the runways during alignment procedures and other multi-service operations.

The heavy-duty Swing Air Jack has a capacity of 9,000 lbs. (4,082 kg) and combines low drive-on height with high lifting capacity needed to handle a wide range of vehicles.

133-83-1 – 9,000-lb. Capacity Swing Air Jack

AlignLights System
Hunter’s AlignLights lighting system provides an efficient light source underneath the vehicle.

AlignLights is powered by the main lift power source a nd requires no additional or exposed electrical cords.

AlignLights automatically turns off when the lift is lowered to the floor and turns on when the lift is raised.

AlignLights is an ALI listed accessory.

20-2377-1
AlignLights system for four-post lifts

Turnplates
All L441T and L444T models will ship with the most appropriate turnplates. When making a substitution, any of the following turnplates may be used.

Integrated bridge lowers and raises as plates are locked, making rolling compensation a snap. Air-operated control system ties directly into PowerSlide lifts
(20-2076-1 shown).

20-2076-1 PowerSlide Turnplates with Automatic Bridges
Two stainless steel turnplates for camera-sensor systems.

20-2075-1 PowerSlide Turnplates without Automatic Bridges
Two stainless steel turnplates for conventional-sensor systems.

20-2532-1 Stainless Steel Turnplate Kit
Two stainless steel Delrin-ball turnplates and bolt-on guide strips.

20-2533-1 Low-Friction Stainless Steel Turnplate Kit
Two stainless steel Torlon ball turnplates and bolt-on guide strips.

20-2531-1 Powder-Coated Turnplate Kit
Two powder-coated, Delrin-ball turnplates and bolt-on guide strips.