Specifications |
| |
|
Max. vehicle gross weight:
20,000 lbs. (9,072 kg) per axle
Drive-on height: 24 in. (610 mm)
Runway width: 33 in. (838 mm)
Overall width: 106 in. (2,692 mm)
Distance between runways: 40 in. (1016 mm)
(Installed width can be varied)
Overall length: (Standard configuration)
403 in. (10,236 mm)
Length of modular runway section: 46 in. (1168 mm)
Approach ramp angle: 8°
Power requirements: 220V, 1ph., 20A
|
|
The RKHD fits a wide range of vehicle applications. |
|
Configurations |
| |
|
SURFACE MOUNT
RKHD
Includes pop-up ramps, turnplate sections and 4 runway sections.
20-1780-2
Pair of modular runway sections. Adds 46 inches to wheelbase capability.
PIT MOUNT
RKHD-P-24
Pair of turnplate sections for 24-inch pit.
20-1780-2
Pair of modular runway sections for 24-inch pit. Adds 46 inches to wheelbase capability.
RKHD-P-30
Pair of turnplate sections for 30-inch pit.
20-1783-2
Pair of modular runway sections for 30-inch pit. Adds 46 inches to wheelbase capability.
20-1781-2
Pit adaptor secures runway to pit back wall.
Jacks
133-77-2
HD AC rolling pit jack, 35,200-lb. capacity.
133-81-2
HD AC jack tray for 24-inch RKHD.
133-76-2
HD conventional jack tray for 24-inch RKHD.
When ordering jack guide rails, consult the 900D ordering guide to determine what should be ordered for your RKHD configuration.
Additional Options
20-2709-1
Two standard turnplates
20-2708-1
Two truck electronic turnplates
20-2710-1
Two audit turnplates; low friction / high durability
|
|
Standard configuration with four runway sections and popup
section raised.
* This wheelbase shows a common 52-inch tandem spacing.
Other tandem spacing will result in different wheelbase
measurements.
Pit configuration: 24-in. and 30-in. RKHD pit versions are available.
This example shows a 30-inch pit with three runway sections. |
NOTICE:
Product delivered to international markets may differ slightly in content to domestic product. Please consult your local distributor for details.
|
|
