Receive daily Push Reports that measure your performance in real time, maximizing your return on investment.
Hunter Quick Check® Unmanned Inspection
Check every vehicle, see every opportunity
Hunter Quick Check® Inspection
Scan every vehicle, no stopping required
5x alignment opportunities
3D tire results help sell critical replacements
Flightboard™ results display provides complete transparency
Identify each vehicle automatically
Capture 40+ images of each vehicle as it enters
Santa Maria Dealerships turn inspection 180 degrees with Hunter unmanned inspection
Unmanned drive-through alignment and tread inspection in 15 seconds.
Morgan Auto Group quadruples tire and alignment sales
Joe Schlueter, Morgan Auto Group's VP of Fixed Operations, talks about the technological advantages and increased sales generated by Hunter's Quick Check Drive® and Quick Tread Edge® at Jerry Ulm Chrysler Dodge Jeep Ram.
Quick Check Drive® at-a-glance
Hunter Engineering Company’s Quick Check Drive® system provides autonomous alignment audits powered by Hunter’s award-winning WinAlign® software. Using 32 lasers and 8 cameras, the completely unmanned system scans a vehicle’s wheels as they drive through without stopping.
Plaza Tire Service “adds gross profit and revenue”
Mark Rhodes, President of Plaza Tire Service®, has invested in Quick Check Drive® and Quick Tread Edge® systems at all of the new Plaza Tire locations being built and has the goal of putting the inspection system in each of Plaza’s 67 locations.
Pouring concrete was a no-brainer for Suntrup
Service Director of Suntrup Automotive Group, Elliot Silk, explains why Quick Check Drive® was the best investment made to help sales, retention and overall customer experience at Suntrup Kia South.
Quick Check Drive® technical overview
Hunter Engineering Company’s Quick Check Drive® system provides autonomous alignment audits powered by Hunter’s award-winning WinAlign® software. The completely unmanned system uses patented measurement technology to scan a vehicle as it drives through without stopping and provides total toe and individual camber measurements in seconds.
Hunter's Quick Check Drive® at Eddy's Toyota
Eddy's Toyota in Wichita, Kansas installed Quick Check Drive® automated alignment inspection systems in their service drives and saw an immediate return on investment, increasing their alignment sales by 300%!
Quick Check Drive® paid off in months at Jay Wolfe Toyota
Jay Wolfe Toyota of West County installed two Quick Check Drive® automated alignment inspection systems in their service drive and saw an immediate return on investment, by doubling their alignment business.
Quick Check Drive® at Cable-Dahmer Chevrolet
Cable-Dahmer Chevrolet of Independence, MO has equipped their service drive with Hunter's Quick Check Drive® automated alignment inspection system.
Alignment business doubled with Push Reports at Greenway
Greenway CDJR was looking for more insight into how their Hunter Engineering equipment was being utilized in their service drive to help drive their fixed operations business. When Todd Heitz, Greenway's National Director of Fixed Operations, learned about Hunter's new Push Reports, he found exactly what he was looking for!
"Quadruple" Alignment and Tire Sales
Real users are reporting quadrupled alignment and tire sales. The Quick Check® Drive unmanned inspection system is so innovative it needs to be seen to be believed.
Return on Investment
Identify & sell the most profitable service opportunities
View your rapid return on investment with automatic alignment inspection
Your Return On Investment
Input your vehicles/day and profits to calculate your payback
All figures rounded to the nearest whole number
Please use Chrome and landscape view for best print results
| Additional Daily Profit |
|
|---|---|
| Annual Return |
|
| Equipment Investment |
$
|
| Equipment Payback |
months!
|
Notes
- One alignment system per 50 cars inspected is typically required to support additional alignment opportunities
- See current tax code. In many cases full purchase price of equipment is tax deductible
- Concrete and site construction work are not included in the price of the equipment.
- Payback calculation: (Equipment Investment) / (Cars/day X Failure rate X acceptance rate X typical profit X 5.5 day/week X 4 wks/mo)
Contact for pricing or demo
Invest over the lifetime of your equipment
Hunter Finance™
Powered by GreatAmerica Financial ServicesFinancing is a great way to lower your upfront cost, and get immediate return on investment. Hunter Finance™ financing options are facilitated by GreatAmerica Financial Services.
- Simpler and faster process than a traditional loan
- 25+ years financing the automotive industry
- Knowledgeable about your specific needs
Annual finance amounts in ROIs are estimates and subject to credit approval by GreatAmerica Financial Services.
Hunter Credit™
Powered by EasyLease Express™Financing is a great option to lower your upfront cost, and get immediate return on investment. Hunter Credit™ financing options are facilitated by EasyLease Express™.
- Same day approvals
- Expense your lease payments to lower your taxable income
- Industry focused with knowledge about your specific needs
Annual finance amounts in ROIs are estimates and subject to credit approval by EasyLease Express™.
Don't lose out on hidden alignment opportunities
Tire wear alone cannot predict wheel alignment
In a 100,000 vehicle study, irregular tire wear is present only 13% of the time. If you check only tire wear and base your alignment assumptions on that, you are missing a wealth of opportunities from vehicles that are out-of-alignment but show regular tire wear.
Quick Check Drive® checks every vehicle's alignment.
If you're not checking camber, you're missing out on profitable services
Unlike Quick Check Drive®, many systems do not measure camber. Vehicles with only camber out would likely pass other systems' inspections, letting opportunities and profits go out the door.
Quick Check Drive® checks every vehicle's camber.
Send a message to your local Hunter business consultant to receive a free pricing quote or product demo.
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
Did you know?
Alignment issues are the leading cause of tire wear
Toe and camber misalignments can cause irregular tire wear. Correcting a vehicle's alignment early can protect the tire investment.
Automatic results
Provide complete customer transparency with Flightboard™ results display
Results visible to all
Customer vehicle results display automatically in waiting area or service drive
Go beyond paper results
Digital presentation helps inform customer before reviewing with technician or service writer
Hunter's Flightboard™ digital display results offer complete transparency for your customers.
Printouts are still a tangible selling tool
- Hands-on customer interaction
- Results in seconds
- Build a layout that is unique to your business
- Select the format with the highest impact for your customers
Automatic process
Streamline your intake process with touchless & efficient design
Eliminate trips around the car
Unmanned solution means faster scans with no labor
Capture data with unmatched accuracy
Eight cameras and 32 lasers produce results with world-class precision
Reduce your intake lane footprint
Requires 25-50% less bay space than other inspection units
- No stopping
- No labor
- No data entry
Track your performance day to day
Set goals, track daily performance, and identify business trends in real time with HunterNet® 2.
Innovative technology
Patented, autonomous technology in powerful, compact units
+
Imagery
High-definition cameras
Automatically identify vehicles based on registered license plates. Add full-vehicle image capture of 40+ photos to prevent false damage claims (optional).
+
Optical lasers
Accurate alignment results
Optical and laser sensors accurately measure camber and total toe by taking 16 measurements per tire. Results are repeatable.
+
Ready
Ready when you are
Scan a vehicle every 3 to 5 seconds, only activating when a vehicle is present.
+
Database
Extensive OEM support
Backed by Hunter's superior OEM specification database, pass/fail results are more accurate, saving time and avoiding comebacks
+
Tire health
Automatic tire tread measurement
Scan each tire edge-to-edge and provide accurate 3D models to help sell replacement opportunities.
Extensive support
Backed by Hunter’s superior OEM spec database
Hunter’s patented Quick Check Drive technology is the only touchless alignment check with the proven accuracy and reliability necessary to earn over 20 original equipment manufacturer approvals.
Automatic vehicle identification
Quickly identify every vehicle through built-in, automatic cameras
Quickly identify vehicles
Automatically determines specs on most vehicles
Built-in cameras
High-resolution images without aiming, focusing, or calibration
1. Capture license plate
As the vehicle drives through, an image of the vehicle and license plate is captured automatically while in motion. Cameras capture front and rear license plates on every vehicle.
2. Identify characters & locale
License information is determined from the photo. Home state is never assumed.
3. Obtain VIN & specs
Automatically determine vehicle year, make, model and alignment specifications. Internet connection is required, powered by CARFAX™. No monthly subscription fees.
4. Vehicle information shown
Customer's vehicle information and photo is automatically displayed on Flightboard™ and printouts for easily-guided conversations. Alignment angle results are compared against OEM specs.
Automatic body image capture
Prevent false damage claims by capturing 40+ images of every vehicle
Safeguard your operations
Save your store thousands of dollars in false vehicle-damage reports
Quickly review images with HunterNet®
Cameras capture an average of 40 images per vehicle, and the intuitive interface displays vehicle info and date of service
Generate collision repair business
Utilize your own collision repair service or refer customers to an affiliate repair shop.
Intuitive Damage-Cam interface displays vehicle information and date of service. 90-day image storage standard.
Send a message to your local Hunter business consultant to schedule a free on-site demo.
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
Did you know?
False damage claims can hurt your profits
Body damage cameras can save thousands of dollars per month on false damage claims. It is not uncommon for customers to be "mistaken" about when damage occurs.
Automatic tread depth
Inform your customers on critical tire replacement services
- Three-dimensional tread map provides insights beyond a single line scan
- Measures wet and dirty tires to maximize uptime and opportunities
- Color-coded results clearly relay good, marginal or bad treads
Measuring tire tread edge wear is critical to proactive tire safety
A bald tire edge will affect wet weather traction, resulting in longer stopping distances and poor handling. If the edge portion of the contact patch has no tread, it cannot shed water.
Most edge wear occurs on the inner edge of the tire and is difficult to detect using the visual inspection methods.
Single-line scan measurement can vary greatly
Sipes, wear bars and stones can affect the results of a single-line scan - even scans taken in close proximity to one another.
Basic hand-held measurement is obsolete
Prior to digital measurement technology, tread depth was measured using a handheld, plunger-type measurement tool. This method is time-consuming and error-prone.
Today's new tires provide great wet weather handling
But if your tires are worn or bald, they are rolling on water
In emergencies, hitting the brakes should mean STOP
Worn tires mean increased stopping distances - up to 10 car lengths vs new
Inspection Ordering Guide
Choose the right inspection equipment for your shop
Lighty-Duty
Class I Vehicles- QCD alignment sensors
- QTEF tread depth
- WU592 WinAlign® console
Suitable for wheel assemblies up to 32 in. and up to 7,000-lb. axle weight.
- Compact
- Sedan
- SUV
- Pickup
- Transit Van
Medium-Duty
Up to Class V Vehicles- QCD alignment sensors
- QTHD tread depth
- WU592MD WinAlign® console
Suitable for wheel assemblies up to 32 in. and from 7,000-20,000 lb. axle weight.
- RV
- Dual-Axle Pickup
- Delivery Van
Heavy-Duty
Class VI Vehicles and Above- QCHD alignment sensors
- QTHD tread depth
- WU592HD WinAlign® console
Suitable for wheel assemblies greater than 30 in. and from 7,000-20,000 lb. axle weight.
- Box Trucks
- Dump Trucks
- Heavy Utility Vehicles
- Municipal and Commercial Buses
- Over-the-Road Tractor Trailers
Recommended add-ons
External Vehicle Identification Camera
Solve difficult install situations such as low lighting, daylight glare, and field of view obstacles. Cameras can be installed indoors, outdoors, ceiling- or wall-mounted, center or off-center.
- 20-3584-1 Short focal length camera for plate-to-camera distance of 96-180 in. Best for systems installed near service drive entrance
- 20-3541-1 Long focal length camera for plate-to-camera distance of greater than 180 in. Used with systems installed in the middle of service drive.
Flightboard™ Digital Results Display
Provide complete customer transparency by showing inspection results as they happen. Results shown dependent on selected equipment.
- Light-Duty (shown above at top) displays up to four wheels per vehicle.
- Medium- to Heavy-Duty (shown above at bottom) displays more than four wheels per vehicle.
Display sourced locally.
Your local Hunter service representative can answer questions, help with equipment operation and provide on-site training.
Purchase genuine Hunter replacement parts online
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
HunterNet® 2 Portal
Take control of your equipment, numbers, and profitability
Equipment intelligence tools help you manage your business and profits in real time
- Maximize your shop's performance
- Monitor your equipment ROI
- Buy genuine Hunter consumables
- View real-time equipment activity
Learn more about what HunterNet® 2 does for other Hunter equipment
Recall past inspections
View previously inspected vehicles, recall printouts, and view body damage camera photos.
Track revenue
Track your profits and potential amount if all needed services were sold.
Monitor your ROI
See your equipment payback in real time.
View your performance
Set goals and see how your business performs day-to-day.
Receive daily reports
Setup to receive daily Push Reports to keep your goals and performance in check.
Connect with your preferred integration partner
Hunter equipment integrates with leading industry partners to span the entire customer service experience, including virtually every major dealer management and shop management system.
Having trouble deciding?
Here are some tips
Are you ready for every profitable service opportunity that enters your shop?
See how others have automated their shops
Documents
Brochures
-
2/3/2023
-
2/3/2023
-
8/30/2021
-
8/30/2021
Ordering Guides
-
8/16/2022
Specification Sheets
-
9/23/2021
-
8/12/2021
Hunter's 3-Year Warranty
We stand beside our equipment and your purchase.
Hunter Engineering Company warrants new equipment replacement parts for three years and labor for six months.
Explore further
HawkEye Elite® Alignment
Productive, profitable wheel alignmentsFour precision cameras measure each wheel using Hunter’s patented QuickGrip® adaptors.
Collision Alignment
Keep your collision repair profits by providing alignment services in-house, saving time for you and your customers.
Hunter service
Largest in the industryHunter deploys the largest service force of highly-qualified representatives in the industry.